|
For many people, making a clock to drive hands on an
exposed dial open to all weathers is a fascinating challenge. This movement is
capable of driving a single exposed dial up to 2ft. in diameter. It is fitted
with the dead beat escapement and the basic movement is hand wound, but
automatic electric winding can be fitted and this is described in the text.
Although the movement is larger than the usual project undertaken by the
amateur clockmaker, the entire construction was carried out on the author's
Myford ML 7 lathe. including the wheelcutting. The description also includes
the construction of the leading-off and motion work together with suitable
hands, Sources of supply for dials is also given. An additional chapter has
now been added to this book. This deals with the construction of an
electrically driven remote controlled dial. I have been asked for this on many
occasions by constructors who want to drive a dial in a tower over their
garage for example and yet want the movement in the house where they can see
it. The remote dial is controlled from the mechanical clock. Other
constructors have asked if striking can be added to this clock. The answer is
yes. I saw an example of this recently. The electric striking unit in my book
'A modern tower clock installation', had been mounted behind the mechanical
movement and connected with a short leading-off rod. An alternative escapement
is now offered, this is the Grasshopper escapement. A full description of its
construction is included.
There are 68 pages plus numerous drawings and photographs. Cutters Module 1.0, 0.75, 0.6,
|
|
 Click on photo to enlarge |
ORDER FORM | ||||||||||||||||||||||||||||||||||
| Back To J Wilding Clocks | ||||||||||||||||||||||||||||||||||||
| Back To Clock Construction Books | ||||||||||||||||||||||||||||||||||||
| PHOTO BY KIND PERMISSION OF Mr A ZUBICK |
|
Please verify prices before ordering as prices can fluctuate due to market forces
|